Ricoh Pro C901S Manual page 14

Finishing Position Adjustment
For details about the following items, see, p.36 "Finishing Position Adjustment".
No
0414 Adjust Staple Position /
Finisher
0415 Adjust Punch Position
With Feed Dir. / Finisher
0401 Adjust Staple Position for
Booklet
0402 Adjust Folding Position for
Booklet
0403 Adjust Staple Position /
Booklet Finisher
0404 Adjust Punch Position
Across Feed Dir. / Booklet
Finisher
0405 Adjust Punch Position
With Feed Dir. / Booklet
Finisher
0407 Set Number of Folds for
Booklet
0413 Correct Punch Skew
0601 Adjust Z-fold Position 1
0602 Adjust Z-fold Position 2
0603 Cover Sheet Position for
Perfect Binding With Feed
Dir
0604 Cover Sheet Position for
Perfect Binding Across
Feed Dir
0605 Adjust Perfect Binding Fin-
ishing Angle
2. Details of Menu Items in Adjustment Settings for Skilled Operators Menu
Item
Adjust the vertical position of the staples when using
Finisher SR5000.
Adjust the horizontal position of the punch holes when
using Finisher SR5000.
Adjust the horizontal position of the booklet staples
when using Booklet Finisher SR5020.
Adjust the horizontal position of the folding when using
Booklet Finisher SR5020.
Adjust the vertical position of the staples when using
Booklet Finisher SR5020.
Adjust the vertical position of the punch holes when us-
ing Booklet Finisher SR5020.
Adjust the horizontal position of the punch holes when
using Booklet Finisher SR5020.
Adjust the paper folding strength by increasing or de-
creasing the number of folds for booklets when using
Booklet Finisher SR5020.
Adjust the amount of skew correction for punching in
order to reduce punch skew due to difference in size,
thickness, and curl of paper, when using Booklet Fin-
isher SR5020.
Adjust the width of the bottom end segment (S) of Z-fold
sheets when using the Z-folding unit.
Adjust the overall fold size (L) of Z-fold sheets when
using the Z-folding unit.
Adjust the horizontal alignment of the cover sheet posi-
tion when performing perfect binding.
Adjust the vertical alignment of the cover sheet position
when performing perfect binding.
Square the top, bottom, and outside edges when trim-
ming a deck of paper.
Description
14