Halt Out - HP AlphaServer ES47 Cli Reference Manual

3.27 halt out

Deasserts halt to a system, CPU, or partition. The halt condition is broadcast throughout the
entire system if no partition is specified.
Note: halt does not apply to Free_Pool.
Syntax
halt out [ {[-cabinet <cabinet> -drawer <drawer>] CPU<n>},
{-ew <ew_coord> -ns <ns_coord> CPU},
{-hp <hard_partition> [-sp <sub_partition>], -all} ]
Arguments
CPU<n> The CPU by cabinet and drawer number. n refers to the CPU
number within the 8P drawer and ranges from 0 to 7.
CPU The CPU by mesh coordinate. The qualifiers of -ew and -ns must be
used in conjunction with it.
Options
-cabinet <cabinet>
-drawer <drawer>
-ew <ew_coord>
-ns <ns_coord>
-hp <hard_partition>
-sp <sub_partition>
-all
Examples
1. Deassert system halt to a non-partitioned system.
MBM> halt out
MBM>
2. Deassert halt to subpartition acct_usa of hard partition account_dept.
MBM> halt out -hp account_dept -sp acct_usa
MBM>
3. Deassert halt to all subpartitions in hard partition account_dept.
MBM> halt out -hp account_dept
MBM>
Cabinet number in hex. If not specified, the number defaults to
0.
Drawer number in hex. If not specified, the number defaults to
0.
East-West coordinate of the CPU in hex.
North-South coordinate of the CPU in hex.
Hard partition name.
Subpartition name. All subpartitions under the hard partition are
affected if none is specified.
All partitions.
Commands
3-41