3.28 hangup
Terminates a console or telnet session. This command will halt an SRM connect or MBM telnet
access session.
Syntax
hangup
{{-hp <hard_partition> [-sp <subpartition>]},
{[-cabinet <cabinet> -drawer <drawer>] {MBM, PBM} <port>}}
Arguments
-hp <hard_partition>
-sp <subpartition>
MBM
PBM
port
Options
-cabinet <cabinet>
-drawer <drawer>
Examples
1. Terminate the console connection.
MBM> hangup -hp Default_HP
MBM>
2. Terminate a telnet session..
MBM> hangup -ca 1 -dr 0 PBM 23
MBM>
See Also
connect, telnet
Hard partition name
Subpartition name. Optional if there is only one
subpartition within the given hard partition.
The micro MBM
The micro PBM
The port number that the MBM/PBM is
connected to. Port 23 is for CLI and port 322 for
Vxworks shell.
Cabinet number in hex. Defaults to 0 if not
specified.
Drawer number in hex. Defaults to 0 if not
specified.
Commands
3-43