Saving A Configuration File; Loading A Configuration File; Device Snapshot Page; Restore Defaults Page - Pepperl+Fuchs ICDM-RX/MOD Manual

ICDM-RX/MOD User Manual
System Menu

7.2.1. Saving a Configuration File

You can use this procedure to save a ICDM-RX/MOD configuration file.
1. Click System | Configuration File.
2. Click the Save Configuration button.
3. Save the configuration file following your browser prompts.

7.2.2. Loading a Configuration File

You can use this procedure to load a previously saved ICDM-RX/MOD configuration file.
1. Click System | Configuration File.
2. Click the Browse button, highlight the configuration file you want to load, and click the Open button.
3. Click the Load Configuration button.

7.3. Device Snapshot Page

You can use the Device Snapshot page to download a snapshot of the device status, log, and configuration.
You may find the information can help you diagnose a problem with the ICDM-RX/MOD. In addition, this
information may be requested by technical support if you have called for assistance.
1. Open your browser and enter the IP address of the ICDM-RX/MOD.
2. Click System | System Snapshot.
3. Click the Device Snapshot button.
4. Save the file using the method for your browser.

7.4. Restore Defaults Page

You can easily some or all of your settings to factory defaults by using the procedure below.
1. Open your browser and enter the IP address of the ICDM-RX/MOD.
2. Click System | Restore Defaults.
3. Select Everything or the specific setting or settings that you want to restore.
4. Click the Restore button.
5. The ICDM-RX/MOD reboots and re-opens the web interface.

7.5. Reboot Page

You can reboot the ICDM-RX/MOD remotely using the Reboot web page.
1. Click System | Reboot.
2. Click the Reboot Now button or wait the 10 seconds for it automatically reboot.
59