Pepperl+Fuchs ICDM-RX/MOD Manual page 43

ICDM-RX/MOD User Manual
Modbus Menus
Accept Broadcast
Messages (Default = No)
Write Master(s) (Default
= All)
Serial Port / IP Address
Description
Shared Memory Configuration Page (Continued)
If selected, the Shared Memory block(s) will accept broadcast messages
addressed to their memory block(s).
Indicates which master(s) have write access to the Shared Memory block.
• All – All masters have write access to the block
• Port specific serial master:
-
Port-1
- Port-2 (2-port and 4-port models only)
- Port-3 (4-port models only)
- Port-4 (4-port models only)
• Ethernet based masters:
- Modbus/TCP - Modbus/TCP master(s) at a specified IP address
- Ethernet TCP/IP – Ethernet TCP/IP master(s) at a specified IP
address
IP address of the Modbus/TCP or Ethernet TCP/IP master. Zeros indicate
that there is no configuration.
Note: Does not apply to All or port-specific serial masters.
User-defined description of the Shared Memory block. ASCII string with a
maximum of 80 characters in length.
43