Modbus Router Home - Pepperl+Fuchs ICDM-RX/MOD Manual

ICDM-RX/MOD User Manual
Configuration Overview
c. Update and save the remote Modbus/TCP configuration properties as required for the device.
Alias Modbus Device ID
a. Click the Modbus tab, which displays the Modbus over TCP Overview (not Modbus/TCP) page.
b. Click the Alias Configuration sub-menu.
c. Click Add Alias Configuration.
d. Configure and save the Alias Modbus Device IDs as required.
Shared Memory
a. Click the Modbus tab, which displays the Modbus over TCP Overview (not Modbus/TCP) page.
b. Click the Shared Memory sub-menu.
c. Configure and save the Shared Memory blocks as required.
3. Remember to click Save to commit the changes and repeat for each interface that requires configuration.
Note: You may want to back up your ICDM-RX/MOD configuration using PortVision DX. Refer to the
PortVision DX help system for information or the appropriate installation document.

2.3. Modbus Router Home

Access the ICDM-RX/MOD Modbus Router Home page from PortVision DX or enter the IP address of the
ICDM-RX/MOD in the Address box of your web browser.
The Home page displays the software version and current network configuration for the ICDM-RX/MOD.
Firmware
Device Name
Serial Number
MAC Address
System Uptime
IP Config
IP Address, IP Netmask, IP
Gateway
34
Modbus Router Home Page
Modbus Router firmware version currently running on the ICDM-RX/MOD.
You can enter a Device Name in the Network | Configuration page, which will
display in this field.
The ICDM-RX/MOD serial number.
This is the MAC address of this ICDM-RX/MOD, which is located on the
compliance label on the ICDM-RX/MOD.
Displays how long this ICDM-RX/MOD has been on-line since powered on or
rebooted.
Type of IP configuration currently in use (static or DHCP).
IP address, netmask, and gateway configured in the ICDM-RX/MOD.