Pepperl+Fuchs ICDM-RX/MOD Manual page 30

ICDM-RX/MOD User Manual
Overview
Access the Remote Modbus/TCP Device Configuration page, by clicking Modbus | Remote Modbus
Configuation and the following configuration entries are required.
Slave Device 1 Slave Device 2 Slave Device 3 Slave Device 4 Slave Device 5
Device ID (Can be
pre-alias as
1
received from
master)
Message Device ID
1(not aliased)
(can be aliased)
Remote IP Address 192.168.0.10
Remote IP Port 502
1000 ms
Timeout
configurable)
Dedicated
No (configurable)
Connection
No (configurable) No
Send Writes First
Disable Broadcasts No (configurable)
Route on Pre-Alias Yes (See note
Device ID below)
If the following conditions are all met then the routing configuration for the pre-alias device ID will be applied to
the message. This includes the Remote IP Address, Remote IP Port, Dedicated Connection, Send Writes First
and Disable Broadcasts options.
1. The Route on Pre-Alias Device ID is enabled in the remote message device ID configuration in this example:
device ID 1.
2. The message device ID has been aliased, or changed from the original device ID.
3. There is a valid remote device configuration entry for the original, or pre-alias, device ID.
30
2 3
1 1
192.168.0.11 192.168.0.12
502 502
1000 ms 1000 ms
(configurable) (configurable)
No No
(configurable) (configurable)
No
(configurable) (configurable)
No No
(configurable) (configurable)
No (N/A) No (N/A)
4 5
1 1
192.168.0.12 192.168.0.12
503 504
1000 ms 1000 ms
(configurable) (configurable)
No No
(configurable) (configurable)
No No
(configurable) (configurable)
No No
(configurable) (configurable)
No (N/A) No (N/A)