Serial Menus; Serial Port Overview Page; Serial Port Configuration Page - Pepperl+Fuchs ICDM-RX/MOD Manual

ICDM-RX/MOD User Manual

Serial Menus

3. Serial Menus
This section discusses the Serial Port Overview Page and Serial Port Configuration Page on Page 35, which are
located under the Serial menu.

3.1. Serial Port Overview Page

The Serial Port Overview page displays information about the configured serial settings for each port.
Valid Rcvd Msg Device ID Range (1-255) – (1-255): Displays the valid received message device ID range.
Messages with other valid device IDs will not be transmitted out this port. (Informational only.)
Valid On Port Device ID Range (1-255) – (1-255): Displays the valid device ID range for slave devices
connected to the serial port. Slave devices with other device IDs will not be accessible on this port.
(Informational only.)
For additional diagnostic information, see the Diagnostics Menu on Page 48.

3.2. Serial Port Configuration Page

To access the Serial Port Configuration page, click Serial | Port x.
The following tables provide information about serial configuration settings.
Serial Configuration
Port Name (Default =
blank)
Port Mode (Default =
RS-232)
Baud Rate (Default =
38400)
Serial Configuration Page
User-definable string used to describe the serial interface. Valid characters include
a-z, A-Z, 0-9, underscores, spaces and dashes. All other characters are
discarded. The Port Name supports up to an 80 character ASCII string.
All panel or rack mount models:
• RS-232 (default)
• RS-485
• RS-422
All DIN rail models:
• RS-232 (default)
• RS-422
• RS-485_2-wire
• RS-485_4-wire_Master
• RS-485_4-wire_Slave
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, and 230400
35