Christie APS Series User Manual page 17

Command Control via the Network
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table (&18).
NOTE • If data is transferred via wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.
Connection
Turn off the projector and the computer.
1.
If you use wired LAN, connect the projector's LAN or HDBaseT port to the
2.
computer's LAN or HDBaseT port with a LAN cable. Use the cable that fulfi lls
the specifi cation shown in fi gure. If you use wireless LAN, insert the USB
wireless adapter into the projector's WIRELESS port.
Turn the computer on, and after the computer has started up turn the
3.
projector on.
LWU650-APS/LWU530-APS
User's Manual - Technical
WIRELESS port
LAN
LAN or
HDBaseT port
• LAN cable (CAT-5e or greater)
or
• For HDBaseT connection
- CAT-5e or greater
- shielded type (connectors included)
- straight cable
- single cable
Command Control via the Network
USB wireless adapter
15
020-001519-02 Rev. 1 (03-2019)
LIT MAN USR APS Series TECH