Christie APS Series User Manual page 21

Network Bridge Communication
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by LAN communication, an external
device that is connected with this projector by RS-232C communication can be
controlled from the computer as a network terminal.
For details, see the 1.5 Network Bridge Function - Network Guide.
NOTE • If data is transferred via wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.
Connection
If you use wired LAN, connect the computer's LAN port and the projector's
1.
LAN or HDBaseT port with a LAN cable. Use the cable that fulfi lls the
specifi cation shown in fi gure. If you use wireless LAN, insert the USB wireless
adapter into the projector's WIRELESS port.
Connect the projector's CONTROL port and the RS-232C port of the
2.
devices that you want to control with a RS-232C cable.
Turn the computer on, and after the computer has started up turn the projector
3.
on.
Set the COMMUNICATION TYPE to NETWORK BRIDGE. (&OPTION menu -
4.
SERVICE - COMMUNICATION in the Operating Guide)
LWU650-APS/LWU530-APS
User's Manual - Technical
WIRELESS port
LAN
LAN or
HDBaseT port
LAN cable
(CAT-5 or greater)
19
Network Bridge Communication
USB wireless adapter
RS-232C cable
(cross)
RS-232C
020-001519-02 Rev. 1 (03-2019)
LIT MAN USR APS Series TECH