Basic Cleaning; Filling With Working Material - WAGNER EvoMotion 40-15 S-HE Translation Of The Original Operating Manual

EDITION 10/2017
7.5 BASIC FLUSHING
Regular flushing
Regular flushing, cleaning and maintenance ensures the pump's high pumping and
extraction capacity.
The cleaning and flushing agents used must be compatible with the working
material.
WARNING
Incompatibility of flushing / cleaning agent with the working medium!
Risk of explosion and danger of poisoning by toxic gases.
Examine the compatibility of the flushing and cleaning agents and working media
on the basis of the safety data sheets.
Flushing procedures
1. Visual check: personal safety equipment, grounding and all
devices ready to use.
2. Place empty, grounded metal tank (5) for the return product
under the return tube (4).
3. Open return valve (3).
4. Slowly open the ball valve (2).
5. Adjust the air pressure on the pressure regulator (1) so that
the pump runs smoothly.
6. Feed until the tank (6) is empty.
Flushing via the return valve
7. Fill cleaning agent into the tank (6).
8. Perform steps 4-6.
9. Flush the system until the cleaning agent that flows into the
tank (5) is clean.
10. Close ball valve (2).
11. As soon as there is no pressure remaining in the spraying
system, close the return valve (3).
Flushing via spray gun
12. Point the spray gun (9), without nozzle, into tank (5) and pull
the trigger.
13. Slowly open the ball valve (2).
14. Flush until clean cleaning agent flows from the spray gun.
15. Close ball valve (2).
16. Relieve the pressure from the spraying system
- by opening the return valve (3)
- by pressing the trigger on the spray gun (9).
17. If the spraying system is depressurized, close spray gun (9) or return valve (3).
18. Secure the spray gun.
19. Clean the outside of the spraying system.
20. Dispose of the contents of the tank (5) according to the local regulations.
7.6

FILLING WITH WORKING MATERIAL

After basic flushing, the pump can be filled with working material. Proceed according to
Chapter 8.2.5, but use working material instead of flushing agent.
ORDER NUMBER 2351778
EvoMotion 40-15 S-HE
EvoMotion 20-30 S-HE
6
closed
2
1
open
C_00157 9
5
3
4
C_HE_00016
33