Initial Addition; Data Logger; Sample Numbers; Data Output (Printer/Computer) - Hach TitraLab User Manual

4.6.2

Initial addition

4.6.3

Data Logger

4.6.3.1

Sample numbers

4.6.4

Data Output (printer/computer)

• Sample volume: 50 mL
mmol/L
mmol/L 1
ppm, mg/L 20.02
°dH, dGH 2.237
gpg 2.336
°Clark, °e 2.800
°F 4.004
By default 0 mL.
Volume of the addition added at the beginning of the titration. Only recommended when
the expected titrant reagent consumption is higher than 6 mL.
Initial addition recommended = Expected titrant volume - 1 mL.
This section describes the functions of the data log.
• Up to 55 results are stored.
• The results can be displayed, printed or sent to a computer.
• When the data log is full, the oldest result is overwritten automatically.
1. Select
SYSTEM > DATA LOGGER > DISPLAY DATA
of search filters can be used to display the results.
: displays the results for a specific date.
BY DATE
: displays all results.
CONTINUE
2. To empty the data log, select
press to confirm.
OK
When a titration program is started, the first sample is assigned the number 1. All
subsequent samples receive sequential numbers until the titration program is closed.
When the program is launched again, the sequential numbers reset to 1.
This function is only displayed if a printer or computer is connected and activated for data
output. Programs, settings and results can be printed or transferred. Following a titration
or calibration, the following data is printed or transferred:
• Type of analysis, date and time, titration result, titrant end volume, duration of titration
and sample number.
1. Select
SYSTEM > DATA OUTPUT
2. Select
FOR PRINTER
matrix. Confirm with
Select
FOR COMPUTER
Table 1 Conversion table
ppm, mg/L °dH, dGH
0.000249 0.4471
1 17.85
0.05603 1
0.05842 1.043
0.07016 1.252
0.1 1.785
SYSTEM > DATA LOGGER > EMPTY DATA-LOGGER
.
followed by the relevant printer model, such as thermal or dot
OK.
followed by either
CAPTURE
gpg* °Clark, °e
0.4281 0.357
17.12 14.25
0.9591 0.7986
1 0.8327
1.201 1
1.712 1.425
and press to confirm. A range
OK
or . Confirm with
TICOM
Operation
°F
0.2497
10
0.5603
0.5842
0.7016
1
and
OK.
27