Keypad - Hach TitraLab User Manual

Installation
Figure 10 Plug connector attachment
1 Slide the plug connector into the power supply
3.5

Keypad

20
The power supply is provided with different plug connectors. The correct plug connector
must be attached to the power supply before first use.
Note: To change the plug connector, press in the catch and slide the plug connector upward.
Navigation key UP
• Used to select between different options on the display.
• Increases numeric values.
• Shows the previous data record in the data log menu.
• Empties the syringe through the discharge tube during manual control.
Navigation key DOWN
• Used to select between different options on the display.
• Reduces numeric values.
• Shows the next data record in the data log menu.
• Fills the syringe through the feed tube during manual control.
ON/OFF key
Navigation key LEFT
• Moves the cursor backward for entry of numeric values.
• Scrolls up in menus.
• Empties the syringe through the feed tube during manual control.
Navigation key RIGHT
• Moves the cursor forward for entry of numeric values.
2 Click the plug connector into place