Riso ComColor GD Series Safety Information Manual page 23

Power Source
Power Consumption
Operating Noise
A-weighted Sound Power Level
Operating Environment
Dimensions (W × D × H)
Weight
Safety Information
Dimensions When Operating
(W × D × H)
1 Within 10 minutes after the last print job
2 When using plain paper and recycled paper (85 g/m
Chart used: Print measurement pattern [Color measurement sample 2 (JEITA standard pattern J6)]
3 The margin when printing envelopes is 10 mm (3/8").
The guaranteed area when printing images is the area enclosed within 3 mm (1/8") of the edges of the paper.
One gigabyte (GB) is calculated as 1 billion bytes.
4
5 Without printing and temperature adjustment operation
The continuous print speed varies depending on the type of optional output equipment connected.
6
When using the face down finisher (A4-LEF Simplex)
Without offset: 160 sheets/minute
With offset: 125 sheets/minute
When using the high capacity stacker (A4-LEF Simplex)
Without offset: 160 sheets/minute
With offset: 110 sheets/minute
7 LEF stands for "Long Edge Feed".
8 When setting [Power Consumption (in Sleep)] to [Low]
9 When using plain paper (62 g/m
AC 100 V - 240 V, 50 Hz - 60 Hz, 12.0 A - 6.0 A
Max. 1,200 W
5
Ready : 150 W or less
8
Sleep : 4 W or less
Stand-by: 0.5 W or less
Max. 66 dB (A) A4-LEF (Simplex) at the maximum print speed
Max. 75 dB A4-LEF (Simplex)
9
Monochrome/Color: 160 ppm
Temperature: 15 ºC to 30 ºC (59 ºF to 86 ºF)
Humidity: 40% to 70% RH (non-condensing)
In use: 1,220 mm × 725 mm × 1,160 mm (48 1/32" × 28 9/16" × 45 11/16")
With cover and tray closed: 1,160 mm × 705 mm × 1,015 mm
(45 11/16" × 27 25/32" × 39 31/32")
Approx. 160 kg (353 lb)
IEC60950-1 compliant, Indoor, pollution degree 2*, At altitudes of 2,000 m or
lower
* The pollution degree of the usage environment due to dirt and dust in the air.
Degree "2" corresponds to a general indoor environment.
With the front cover open and the operation panel in the upright position:
1,220 mm × 1,240 mm × 1,160 mm (48 1/32" × 48 13/16" × 45 11/16")
2
(23-lb bond)), and standard density setting
2
(17-lb bond))
ComColor GD Series Safety Information
21