Riso ComColor GD Series Safety Information Manual page 15

■ Printable Area of Envelopes
The following envelopes of the standard size can be printed on this machine:
• C4: 229 mm × 324 mm (9" × 12 3/4")
• C5: 162 mm × 229 mm (6 3/8" × 9")
• C6: 114 mm × 162 mm (4 1/2" × 6 3/8")
• DL R: 110 mm × 220 mm (4 5/16" × 8 21/32")
• Envelope 229 mm × 305 mm (9" × 12")
• Envelope 254 mm × 331 mm (10" × 13")
• NO.10 envelope 105 mm × 242 mm (4 1/8" × 9 1/2")
To print on the envelopes of the non-standard size, register the envelope size using [Custom Paper Entry] on the
[Environment] tab of the printer driver.
The printable area on envelopes is the area enclosed within 10 mm (3/8") of the edges of the envelope.
Any part of the image that does not fit within the printable area is not printed.
Envelope size
● When printing on envelopes, it is recommended you install the optional stacking tray or the envelope feed kit.
● To also print on the flap section, you must register the envelope size including the flap section.
● You cannot use duplex print when printing on envelopes.
Envelope size
Printable area
Output direction
10 mm (3/8")
10 mm (3/8")
10 mm (3/8")
10 mm (3/8")
ComColor GD Series Safety Information
13