Table of Contents
Advertisement
Figure 13. Installing the Chassis with ReadyRails in a Non-Threaded-Hole Rack
Installing ReadyRails: Tooled Method for a Threaded-Hole Rack
To install ReadyRails using a tooled method in a threaded-hole 2- or 4-post rack:
1.
Locate the front rack rails in the Dell ReadyRails kit. For a 2-post rack, locate the left and right rail
brackets (items 5 and 6 in Figure 9).
•
For a 2-post rack, take out the left and right rail brackets (items 3 and 4 in Figure 9) and slide
them into the front rails.
•
For a 4-post rack, take out the left and right rear rails (items 7 and 8 in Figure 9) and slide them
into the front rails.
2.
Remove the pins from the front and rear of each rail using a flat-tipped screwdriver. Pull on the latch
subassemblies to remove them from the rail brackets (items 1 and 2 in Figure 13).
Installing the Hardware
19
Advertisement
Table of Contents
