Installing The Chassis Into An Equipment Rack - Dell C7004/C150 Installing And Maintaining

Installing the Chassis into an Equipment Rack

Follow these steps to install the chassis into a 19-inch equipment rack:
Step Task
Dell Networking recommends that you install a equipment rack bar. This bar enables you to easily position the
1
chassis into the rack and stabilizes the chassis.
• Orient the equipment rack bar at the desired location in the rack, with the arrows pointing up and the smooth
side facing outward.
Figure 4-1. Installing the Equipment Rack Bar
Attach the bar to the rack
2
Use an equipment lift to align the chassis rack-mount holes with the equipment rack holes, and situate the chassis
3
on top of the equipment rack bar.
16 | Installing the C7004/C150 Chassis
(Figure 4-1) using the mounting screws provided with your rack.