Table of Contents
Advertisement
DALì LINER PLUS
•
Turn the equipment's switch (F11) to ON (I)
•
bring the accelerator lever (F12) to about 1/2 of its run.
1/2
•
Pull the rope to start (F13).
F13
WASHING OF THE NEW EQUIPMENT
•
The equipment has already been adjusted at our factory with
light mineral oil left inside the pumping group as protection.
Therefore, wash with diluent before sucking the product.
www.larius.eu
12
•
F11
•
F18
F12
•
•
Fill the product tank with wash fluid.
Clean the inside of the tank with a brush.
Ensure the gun (F14) is without nozzle.
F14
Open the product output tap (F15).
F15
Ediz. 005 - 09/2015
Advertisement
Table of Contents
