Table of Contents
Advertisement
DALì LINER PLUS
The high speed of the product in the hose can create
static electricity through discharges and sparks.
It is suggested to earth the equipment.
The pump is earthed through the earth cable of
the supply. The gun is earthed through the high
pressure flexible hose. All the conductors near
the work area must be earthed.
•
NEvER SPRAy OvER FLAMMAbLE PRODUCTS OR SOL-
vENTS IN CLOSED PLACES.
•
NEvER USE THE TOOLING IN PRESENCE OF POTENTIALLy
ExPLOSIvE GAS.
Always check the product is compatible with the
materials composing the equipment (pump, spray
gun, flexible hose and accessories) with which it
can come into contact. Never use paints or sol-
vents containing halogen hydrocarbons (as the
methylene chloride).
If these products come into contact with aluminium
parts can provoke dangerous chemical reactions
with risk of corrosion and explosion.
IF THE PRODUCT TO BE USED IS TOXIC, AVOID
INHALATION AND CONTACT BY USING PRO-
TECTION GLOVES, GOGGLES AND PROPER
FACE SHIELDS.
TAKE PROPER SAFETY MEASURES FOR THE
PROTECTION OF HEARING IN CASE OF WORK
NEAR THE PLANT.
CONDITIONS OF GUARANTEE
The conditions of guarantee do not apply in the
following situations:
- improper washing and cleaning of components
causing malfunction, wear or damage to the
equipment or any of its parts;
- improper use of the equipment;
- use that does not conform with applicable na-
tional legislation;
- incorrect or faulty installation;
- modifications, interventions and maintenance that
have not been authorised by the manufacturer;
- use of non-original spare parts or parts that do
not correspond to the specific model;
- total or partial non-compliance with the instruc-
tions provided.
www.larius.eu
10
Engine safety precautions:
•
Read the engine operator's manual annex.
Never attempt to tamper with the calibre of
instruments.
SETTING-UP
F
TUBE CONNECTIONS
Flexible re-circulation tube connection
•
Connect the flexible re-circulation tube (F1) to the connector
(F2) ensuring to tighten the fittings (the use of two wrenches
is suggested).
F1
Pump unit flexible tube connection
•
Connect the product suction flexible tube (F3) to the connector
(F4) ensuring to tighten the fittings (the use of two wrenches
is suggested).
F2
F3
F4
Ediz. 005 - 09/2015
Advertisement
Table of Contents
