Connection Of The Gun; Starting The Combustion Engine - Larius MIRO LINER PLUS HAND PUSH Operating And Maintenance Instruction Manual

CONNECTION OF THE GUN

• Connect the high pressure flexible hose (F5) to the fitting
(F6) and the gun (F7) tightening the fittings strongly (the use
of two wrenches is suggested).
NEVER use sealants on fittings' threads.
• It is recommended to use the hose provided with the standard
kit.
NEVER use a damaged or a repaired flexible hose.
F6
F5
F7
Ediz. 005 - 09/2015

STARTING THE COMBUSTION ENGINE

To switch the internal combustion engine proceed as follows:
•
F5
•
•
DALì LINER PLUS
Fill the fuel tank (F8).
F8
Open the fuel tap (F9) and position it to "ON" (I).
Pull lever (F10) for first start-up cold (position it to "I").
www.larius.eu
F9
F10
11