Table of Contents
Advertisement
D
TRANSPORT AND UNPACKING
•
The packed parts should be handled as indicated in the
symbols and markings on the outside of the packing.
•
before installing the equipment, ensure that the area to
be used is large enough for such purposes, is properly
lit and has a clean, smooth floor surface.
The user is responsible for the operations of unlo-
ading and handling and should use the maximum
care so as not to damage the individual parts or
injure anyone.
To perform the unloading operation, use only
qualified and trained personnel (truck and cra-
ne operators, etc.) and also suitable hoisting
equipment for the weight of the installation or its
parts. Follow carefully all the safety rules.
The personnel must be equipped with the neces-
sary safety clothing.
•
The manufacturer will not be responsible for the unloading
operations and transport to the workplace of the machine.
•
Check the packing is undamaged on receipt of the
equipment. Unpack the machine and verify if there has
been any damage due to transportation.
In case of damage, call immediately LARIUS and the
Shipping Agent.
All the notices about possible damage or anomalies
must arrive timely within 8 days at least from the date
of receipt of the plant through Registered Letter to the
Shipping Agent and to LARIUS.
The disposal of packaging materials is a custo-
mer's competence and must be performed in
accordance with the regulations in force in the
country where the plant is installed and used.
It is nevertheless sound practice to recycle
packaging materials in an environment-friendly
manner as much as possible.
E
SAFETY RULES
•
THE EMPLOyER SHALL TRAIN ITS EMPLOyEES AbOUT
ALL THOSE RISkS STEMMING FROM ACCIDENTS, AbOUT
THE USE OF SAFETy DEvICES FOR THEIR OWN SAFE-
Ty AND AbOUT THE GENERAL RULES FOR ACCIDENT
PREvENTION IN COMPLIANCE WITH INTERNATIONAL
REGULATIONS AND WITH THE LAWS OF THE COUNTRy
WHERE THE PLANT IS USED.
Ediz. 005 - 09/2015
•
THE bEHAvIOUR OF THE EMPLOyEES SHALL STRICTLy
COMPLy WITH THE ACCIDENT PREvENTION AND ALSO
ENvIRONMENTAL REGULATIONS IN FORCE IN THE
COUNTRy WHERE THE PLANT IS INSTALLED AND USED.
Read carefully and entirely the following instructions
before using the product.
Please save these instructions in a safe place.
The unauthorised tampering/replacement of one
or more parts composing the machine, the use of
accessories, tools, expendable materials other than
those recommended by the manufacturer can be a
danger of accident.
The manufacturer will be relieved from tort and
criminal liability.
•
kEEP yOUR WORk PLACE CLEAN AND TIDy. DISORDER
WHERE yOU ARE WORkING CREATES A POTENTIAL RISk
OF ACCIDENTS.
•
ALWAyS kEEP PROPER bALANCE AvOIDING UNUSUAL
STANCE.
•
bEFORE USING THE TOOL, ENSURE THERE ARE NOT
DAMAGED PARTS AND THE MACHINE CAN WORk PRO-
PERLy.
•
ALWAyS FOLLOW THE INSTRUCTIONS AbOUT SAFETy
AND THE REGULATIONS IN FORCE.
•
kEEP THOSE WHO ARE NOT RESPONSIbLE FOR THE
EQUIPMENT OUT OF THE WORk AREA..
•
NEvER ExCEED THE MAxIMUM WORkING PRESSURE
INDICATED.
•
NEvER POINT THE SPRAy GUN AT yOURSELvES OR AT
OTHER PEOPLE. THE CONTACT WITH THE CASTING CAN
CAUSE SERIOUS INJURIES.
•
IN CASE OF INJURIES CAUSED by THE GUN CASTING,
SEEk IMMEDIATE MEDICAL ADvICE SPECIFyING THE
TyPE OF THE PRODUCT INJECTED. NEvER UNDERvALUE
A WOUND CAUSED by THE INJECTION OF A FLUID.
•
ALWAyS DISCONNECT THE SUPPLy AND RELEASE THE
PRESSURE IN THE CIRCUIT bEFORE PERFORMING ANy
CHECk OR PART REPLACEMENT OF THE EQUIPMENT.
•
NEvER MODIFy ANy PART IN THE EQUIPMENT. CHECk
REGULARLy THE COMPONENTS OF THE SySTEM. RE-
PLACE THE PARTS DAMAGED OR WORN.
•
TIGHTEN AND CHECk ALL THE FITTINGS FOR CONNEC-
TION bETWEEN PUMP, FLExIbLE HOSE AND SPRAy GUN
bEFORE USING THE EQUIPMENT.
•
ALWAyS USE THE FLExIbLE HOSE SUPPLIED WITH STAN-
DARD kIT. THE USE OF ANy ACCESSORIES OR TOOLING
OTHER THAN THOSE RECOMMENDED IN THIS MANUAL,
MAy CAUSE DAMAGE OR INJURE THE OPERATOR.
•
THE FLUID CONTAINED IN THE FLExIbLE HOSE CAN bE
vERy DANGEROUS. HANDLE THE FLExIbLE HOSE CARE-
FULLy. DO NOT PULL THE FLExIbLE HOSE TO MOvE THE
EQUIPMENT. NEvER USE A DAMAGED OR A REPAIRED
FLExIbLE HOSE.
DALì LINER PLUS
www.larius.eu
9
Advertisement
Table of Contents
