Table of Contents
Advertisement
ZEUS LINER
•
Pull the lever (F12) for the first cold start up (in position
CHOKE/CLOSE).
•
Pull the start up cord (F13).
F13
WASHING OF THE NEW EQUIPMENT
•
The equipment has already been adjusted at our factory
with light mineral oil left inside the pumping group as
protection. Therefore, wash with diluent before sucking
the product.
•
Lift the suction pipe and dip it into the solvent tank.
•
Clean the inside of the tank with a brush.
www.larius.eu
12
•
Ensure the gun (F14) is without nozzle.
F12
•
Open the product output tap (F15).
F13
•
Start the motor following the indications provided in the
chapter "STARTING THE MOTOR".
Press the switch (F16) of the equipment "ON" (I).
•
F14
F15
OPEN
ON
F16
Ed. 001 - 12/2015
Advertisement
Table of Contents
