Table of Contents
Advertisement
CORRECT PROCEDURE OF DECOMPRESSION
M
Premere l'interruttore (N1) su "OFF"(0) per spegnere l'ap-
•
parecchiatura.
Ridurre la pressione al minimo (ruotare in senso antiorario
•
la manopola di regolazione (N2) della pressione).
N2
•
Unlock the safety clamp (N3).
N3
Ediz. 005 - 09/2015
N1
Clamp released
•
Point the gun (N4) at the receptacle (N5) used to collect the
product and press the trigger to release the pressure. When
completed, activate the safety catch again.
N5
•
Open the recirculating-safety valve (N6) to release the re-
maining pressure.
OPEN
WARNING:
If the equipment is still under pressure after per-
forming the operations above described because
of the nozzle or the flexible hose clogged, proceed
as follows:
•
Loosen very slowly the gun nozzle.
•
Release the clamp.
•
Point the gun at the container of the product
and press the trigger to release pressure.
•
Loosen very slowly the fitting of connection
from the flexible hose to the gun.
•
Clean or replace the flexible hose and the
nozzle.
DALì LINER PLUS
N4
N6
www.larius.eu
19
Advertisement
Table of Contents
