Summary of Contents for Larius MIRO LINER PLUS HAND PUSH
Page 1
Airless Diaphragm Dalì Liner Plus Horizontal street marking YOUR PARTNER FOR ALL YOUR MARKING NEEDS SINCE 1969 ITALIANO Ediz. 005 - 09/2015...
Page 3
WELL PROVEN TECHNICAL QUALITY FOR ANY ON-GROUND MARKING APPLICATION The LARIUS airless line markers successfully join product performan- ce with operator requirements and allow the marking and the mainte- nance of any kind of pavement lines on roads, motorways, airports,...
Page 4
Professional line markers for the ideal “line” WHERE’S TARMAC... We can make a long “Road” together MIRò LINER PLUS DALì LINER PLUS GIOTTO LINER PLUS VIKING HAND PUSH HAND PUSH SELF-PROPELLED LINER Motor Power 5,5 - HP 5,5 - HP 10 - HP 12,75 - HP Max.
Page 5
Professional line markers for the ideal “line” ... THERE’S LARIUS An already marked work when you start. EXCALIBUR LINER ZEUS LINER DRAGON LINER EVEREST TH K2 ECO HAND PUSH HAND PUSH SELF-PROPELLED SELF-PROPELLED SELF-PROPELLED 7 - HP 9 - HP...
Page 6
Due to a constant product improvement programme, the factory reserves the right to modify technical details mentioned in this manual without prior notice.
WE ADVISE THE USE OF THIS EQUIPMENT ONLY BY PROFESSIONAL OPERATORS. ONLY USE THIS MACHINE FOR USAGE SPECIFICALLY MENTIONED IN THIS MANUAL. Thank you for choosing a LARIUS S.R.L. product. As well as the product purchased, you will receive a range of support services enabling you to achieve the results desired, quickly and professionally.
Do not wear bracelets, earrings, rings, chains, or anything else that may hinder the operator’s work. Do not wear clothing with wide sleeves, scarves, ties, or any other piece of clothing that could get tangled up in moving parts of the equipment during the work, inspection, or maintenance cycles. Ediz. 005 - 09/2015 www.larius.eu...
• Selecting solid or broken-line painting functionality. In the LARIUS models, the paint canister can be loaded directly This type of equipment is capable of painting one line at a time upon the undercarriage or else poured into the non-stick, 50 L in a single color.
18383 25 L tank Colours Automatic line-marking manual Medium road-marking and maintenance Applications series Multi-use sprayer 105 kg Weight Lenght (A) 1600 mm Height (B) 1100 mm (C) 900 mm Width Ediz. 005 - 09/2015 www.larius.eu...
DALì LINER PLUS DESCRIPTION OF THE EQUIPMENT POS. Description Description POS. Lever gun Petrol tank Lever lock/unlock wheel direction Manometer high pressure Tank Filter Air cold starting Recirculation tube Ediz. 005 - 09/2015 www.larius.eu...
Page 13
POS. Description Description POS. Lock brake safety Oil level cap combustion engine Pumping group Cooling fan Combustion engine Transmission belt pumping group Rotating wheel Driving pulley AT 250 gun Driving pulley Spraying gun feeding tube Ediz. 005 - 09/2015 www.larius.eu...
Page 14
POS. Description Description POS. Air filter belt tensioning screw Fuel tap OPEN/CLOSE Rope starter motor Product feeding tube ON - OFF switch combustion engine Spraying gun feeding tube Accelerator lever Oil level light hydraulic body Ediz. 005 - 09/2015 www.larius.eu...
• kEEP THOSE WHO ARE NOT RESPONSIbLE FOR THE been any damage due to transportation. EQUIPMENT OUT OF THE WORk AREA.. In case of damage, call immediately LARIUS and the • NEvER ExCEED THE MAxIMUM WORkING PRESSURE Shipping Agent. INDICATED.
- modifications, interventions and maintenance that have not been authorised by the manufacturer; - use of non-original spare parts or parts that do not correspond to the specific model; - total or partial non-compliance with the instruc- tions provided. Ediz. 005 - 09/2015 www.larius.eu...
It is recommended to use the hose provided with the standard kit. NEVER use a damaged or a repaired flexible hose. Open the fuel tap (F9) and position it to “ON” (I). • Pull lever (F10) for first start-up cold (position it to “I”). • Ediz. 005 - 09/2015 www.larius.eu...
Open the product output tap (F15). WASHING OF THE NEW EQUIPMENT • The equipment has already been adjusted at our factory with light mineral oil left inside the pumping group as protection. Therefore, wash with diluent before sucking the product. Ediz. 005 - 09/2015 www.larius.eu...
Page 19
Release the trigger when finished. NEVER spray solvents indoors. In addition, it is recommended to keep away from the pump in order to avoid the contact between the solvent fumes and the motor. Ediz. 005 - 09/2015 www.larius.eu...
• Mix and filter the product before using it. For filtration use CLOSE-MESH (rif. 214) and LARGE-MESH (rif. 215) LARIUS METEX braids. Make sure the product to be used is compatible with the materials employed for manufacturing the equipment (stainless steel and aluminium). Because of that, please contact the supplier of the product.
SETUP PROCEDURE • Use the tooling after performing all the SETTING UP ope- rations above described. • Check that there is enough unleaded petrol. • Open the product output tap (H1). Ediz. 005 - 09/2015 www.larius.eu...
On the contrary, a too high pressure causes a high fog (“overspray”) and waste of product. • Pull the lever on the right (l2) to activate the spray gun and begin working, advancing the machine in a continuous manner. Ediz. 005 - 09/2015 www.larius.eu...
Top up if necessary. • Empty all of the wash fluid from the tank and turn off the equipment. Turn the pressure adjustment handle (J1) to minimum (pump • stopped). Ediz. 005 - 09/2015 www.larius.eu...
• Clean and, if necessary, replace the worn seals (L6). • Fill the pump with the recommended oil until it reaches the maximum level the plug (L5). • Then, substitute the oil every 250 hours. Ediz. 005 - 09/2015 www.larius.eu...
Point the gun at the container of the product and press the trigger to release pressure. • Loosen very slowly the fitting of connection from the flexible hose to the gun. • Clean or replace the flexible hose and the nozzle. Ediz. 005 - 09/2015 www.larius.eu...
• The nozzle is worn; • Replace it; • The atomization is imperfect Always release the air compressed supply and unload the plant pressure before performing any check or repla- cement of pump parts (see "correct procedure of decompression"). Ediz. 005 - 09/2015 www.larius.eu...
Tank 20L Rif. 4890 pag. 31 Complete colour body Rif. 18940 pag. 3228 Complete pump unit Rif. 19307 pag. 22 Complete steering unit High pressure gun Accessories Rif. 4876 AT 250 pag. 35 pag. 29 pag. 34 Ediz. 005 - 09/2015 www.larius.eu...
Page 28
DALì LINER PLUS COMPLETE PUMP UNIT REF. 19307 WARNING: Always indicate code and quantity for each part required. Ediz. 005 - 09/2015 www.larius.eu...
Page 32
DALì LINER PLUS TRANSMISSION UNIT AND POSITIONING RIF. 18358 WARNING: Always indicate code and quantity for each part required. Ediz. 005 - 09/2015 www.larius.eu...
WARNING: Always indicate code and quantity for each part required. Pos. Code Description Pos. Code Description 4111 Complete cover 4064 Tank 4314 Screw 4274 Belt 52017 69014 Screw 4308 Ring 4250 Base 4309 Rubber 4834 Complete suction+delivery system 4109 Cover Ediz. 005 - 09/2015 www.larius.eu...
Page 42
Art. K11421-K11426-K11431: cm 130-180-240 Art. 16780: TELESCOPIC PAINT ROLLER complete with: n. 1 Roller with extra-long fiber n. 1 Roller with long fiber n. 1 Roller with medium fiber Flexible hose mt. 2 3/16 “ M16x1,5 Ediz. 005 - 09/2015 www.larius.eu...
Page 43
GUN EXTENSION REVERSIBLE TIP INCLUDED Art. 170: cm 30 Art. 171: cm 60 - Art. 172: cm 100 PLA 1/4” + FAST-CLEAN TIP INCLUDED Art. 11420-11425-11430: cm 130-180-240 PLA M16x1,5 + FAST-CLEAN TIP INCLUDED Art. 11421-11426-11431: cm 130-180-240 Ediz. 005 - 09/2015 www.larius.eu...
Page 44
DIRECT LINE CUSTOMERS TECHNICAL SERVICE Tel. (39) 0341.621256 - Fax (39) 0341.621234 CONSTRUCTEUR: Paint spraying equipment 23801 CALOLZIOCORTE - LECCO - ITALy - via Antonio Stoppani, 21 TEL. (+39) 0341/62.11.52 - Fax (+39) 0341/62.12.43 E-mail: larius@larius.com - Internet http://www.larius.eu...