MAXinBOX 66
the functionality may differ slightly. Therefore, please refer specifically to the
aforementioned user manual.
Motion detectors with references ZN1IO-DETEC and ZN1IO-DETEC-N are
not compatible with MAXinBOX 66 (may report inaccurate measurements if
connected to this device).
When connected to MAXinBOX 66, the rear micro-switch of model ZN1IO-
DETEC-P should be set to position "Type B".
http://www.zennio.com
Technical Support:
http://support.zennio.com
10
Need help?
Do you have a question about the MAXinBOX 66 and is the answer not in the manual?
Questions and answers