E5B5-Xx16 Due To Fractured Hook Arm In The Waste Paper Case Assembly.(Perfect Binder-A1,Perfect Binder-C1) - Canon Perfect Binder A1 Troubleshooting Manual

Table of Contents

Advertisement

Copier B/W | imagePRESS 1135/1125/1110 Series |
E5B5-xx16 due to fractured hook arm in the waste paper case
assembly.(Perfect Binder-A1,Perfect Binder-C1)
[Symptom]
E5B5-xx16 error may occur during bookbinding operation.
- E5B5-xx16 error: Waste detection error of Perfect binder
[Cause]
The Hook arm of the shutter unit gets fractured and trim waste processing operation does not run properly. As a result, the
symptom occurs.
[Service work]
When the above mentioned symptom has occurred, prepare and replace with the new type Hook arm (4A3-2391-010) following
the procedure below. The procedure below starts from the step after disconnected Perfect binder from the copier main body.
1) Checking fracture of the hook arm
Check if the Hook arm is fractured by moving manually the Shutter of the Waste paper case assembly.
1-1) Open the front cover (Right/Left).
1-2) While holding the front cover (Left), remove the upper/lower hinges to remove the front cover (Left). Pull the hinge in the
direction of arrow while pushing the black lever to remove the hinge.
1-3) Remove the front cover (Right) in the same manner.
82

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents