Canon Perfect Binder A1 Troubleshooting Manual page 91

2-9) Remove the screws fixing the Trimming assembly.
- 4 screws
CAUTION:
Be sure to confirm that the Trimming blade is evacuated to a safe position before pulling it out. If the Trimming blade is not
evacuated to a safe position, evacuate the Trimming blade to a safe position following to the service manual.
2-10) Removal of the Power supply mount
Go to the step 2-11-1) for Perfect Binder-D1 as it has the Stack cooling fan (stack rotation assembly).
Go to the step 2-11-8) for Perfect Binder-A1/B1/C1 as they do not have the Stack cooling fan (stack rotation assembly).
2-11-1) Remove the Power supply assembly 1.
- 2 connectors
- 4 screws
89