Canon Perfect Binder A1 Troubleshooting Manual page 59

2-4) Move to the front side of the trimming assembly, remove the sensor connector and reuse band, and then release the two
wire saddle and one edge saddle.
- 1 connector
- 1 reuse band
- 1 wire saddle
- 1 edge saddle
2-5) Remove the stack rotation assembly by holding it left and right stays.
- 8 screws
[Caution]
• After removing the stack rotation assembly, there remains a trimming blade. Never touch it to prevent injury.
• When reinstalling the stack rotation assembly, align its bottom hole with the positioning pin.
57