Canon Perfect Binder A1 Troubleshooting Manual page 19

For instance, GLU-AMT3 adjustment value is to be applied when a booklet is produced whose thickness of stack of sheets
(Signature) is between 3.5 and 6.4mm (when the thickness of paper is 0.1mm, approximate 35 to 64 sheets). At this time, if the
number of the sheets is between 35 and 50, the parameter of [1 to 50 sheets] setting button in user mode also becomes effective,
and if the number of the sheets is between 51 and 64, the parameter of [51 to 100 sheets] setting button in user mode also
becomes effective. In regard to adjusting the glue amount, it is important to understand the relationship between service mode
and user mode. When to adjust the glue amount using service mode, it is recommended to set the parameter of user mode to
"0" (default value). Both the service mode and the user mode adjust the spread glue amount at the same location, and an
adjustment beyond the adjustable range of service mode is unavailable. The list below shows the sample of main parameters
(adjustable range: -20 to 20)
[Service work]
Perform the work of adjusting the glue amount in the order below:
- Adjusting the glue amount for plain paper
1) Check the condition of paper
2) Check the GLUING parameter on the service label affixed inside the front right door of Perfect Binder
3) Check the GLUING parameter of service mode of the device and enter an adjustment value for correction
4) Check the stack registration guide
5) Print out a sample booklet of stack thickness 0 to 1.4mm
6) Check the condition of glue applied to the booklet and adjust the glue amount
7) Print out again the sample booklet
8) Print out a sample booklet of stack thickness 1.5 to 25.0mm
- Adjusting the glue amount for coated paper
Perform the same procedure as the one for plain paper
Perform the glue amount adjusting work following the procedure below:
<Procedure to adjusting the spread glue amount for plain paper>
1) Check the condition of paper
Take 10 sheets of two-sided copy using the paper used as stack of sheets (Signature) in bookbinding and check the condition
of curl on paper.
The paper [A] is curled and [B] is not curled.
17