Canon Perfect Binder A1 Troubleshooting Manual page 60

3) Attaching the reinforcement kit
3-1) Check the contents of the kit.
- UPPER PRESS RAIL [1] 2 pcs
- LOWER PRESS RAIL [2] 2 pcs
- FRONT PRESS SUPPORT GUIDE [3] 1 pcs
- REAR PRESS SUPPORT GUIDE [4] 1 pcs
- SPACER [5] 2 pcs
- M3×8 Screw [6] 8 pcs
- M4×8 Screw [7] 4 pcs
3-2) Remove the 8 screws [1], and remove the rail [2] on the front side (upper/lower) and on the rear side (upper/lower).
- Rail x4
- Screw x8
58