Control Panel Display & Operating Instructions - Gree GPC08AI-K3NNC6A Owner's Manual

CONTROL PANEL DISPLAY & OPERATING INSTRUCTIONS
CONTROL PANEL & DISPLAY
Temperature selection button
FAN Speed lamp
OPERATING INSTRUCTIONS
When pressing key is valid,buzzer makes a sound,indicated lamp indicates relevant state,system will last
for 2 seconds.
l. ON/OFF Button
Press the button once to manually turn the unit on. Press once more to turn the unit off.
2. "+","-" Button
In COOL mode, press "-" once, the set temperature will decrease 1
temperature will incresae 1
3. Mode Button
Press Mode Button repeatedly to cycle between the modes:Cooling,Dry,and Fan only mode.
Each press of the Mode button will light up a different lamp on the control panel. The exhause
hose and window kit must be installed when the unit is in Cool or Dry mode.When using the unit
as a fan,it is unnecessary to keep the exhaust hose and window kit connected to the unit.
4. Fan speed Button
When the unit is running in Cool or Fan mode, press the Fan speed Button to select the fan speed
in High, Middle, Low, Auto.
In cool mode, it can decrease the temperature of the room, and make people very comfortable.
5.Water Full
When COOL or DRY is running, condensate will drain to water tank. When water tank is filled.
Buzzer will sound 8 times, LED screen show error code 'H8'.
In this case, reference page 8 to drain out water intank.
6.Louver Direction
This unit has 4-Way directional louvers.
Use the louver guides to direct air where
cooling or fanning is needed most.Hold the
louver and adjust the air flow direction,
as show in the right diagram.
Hold this hand grip to adjust the
direction of Horizontal Louvers
LED window
-
Med
Low
Fan
speed
High
Auto
ON/OFF button
Fan speed button
℃ ( ℉ ).
The set temperature range from 16
COOL mode lamp
Cool
+
Mode
ON/OFF
Fan only
FAN mode lamp
-1 - 1
Receiver window
DRY mode lamp
Dry
MODE button
, press "+" once, the set
℃ (℉)
to 30 ( 61 to 6
℃ ℃ ℉
Hold this hand grip to adjust the
direction of Vertical Louvers
8 ).
℉