Installation Of Drainage Hose - Gree GPC08AI-K3NNC6A Owner's Manual

INSTALLATION OF DRAINAGE HOSE

Install of drainage hose(as shown in following figure):
Note: Drainage hose must be installed before using otherwise block of drain may occur and affects
normal run of unit.
1. Remove drain cap from drain port.
2. Attach the drain hose clamp to the back panel of the air conditioner near the drain port with the screw
provided.
3. Attach one end of the drain hose to the drain port with the clip. See Drain Hose graphic .
4. Insert the rubber plug into the other end of the drain hose and secure with clip. See Drain Hose graphic.
5. Snap the free end of het drain hose into the drain hose clamp.
B A
Drain port
A.
B. Drain cap
A
B
B
A
A. Rubber plug
D.
E . Drain hose clamp
B. Drain port
C. Drain hose
A. Drain port
B. Attach drain hose clamp with screw provided.
E
D
C
Drain hose clips
-7-