Table of Contents
Advertisement
dusty conditions, clean the fuel tank as often as necessary.
BASIC MAINTENANCE SCHEDULE - KUBOTA ENGINE
Refer to the original equipment manufacturer's operating manual for a complete list of
maintenance requirements. Failure to comply with the procedures as described in the engine
operator's manual will nullify the warranty, decrease performance and cause equipment
damage or premature equipment failure. Maintenance records may be required to complete
Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement
copies of the engine operator's manual, contact an authorized dealer in your area.
Item
Check Oil Level
Check Coolant Level
Check Fuel Level
Check Tire Pressure
Check All Electrical Connections
Inspect Radiator Fins For Debris, Clean As Required
Inspect Light Tower Winch For Proper Operation
Check Fuel Pipes And Clamp Bands
Clean Air Cleaner Element
Clean Fuel Filter
Check Fan Belt Tightness
Drain Water Separator
Check Radiator Hoses And Clamp Bands
Change Engine Oil
Check Intake Air Line
Replace Oil Filter Cartridge
Replace Fuel Filter Cartridge
Clean Water Separator
Lubricate Leveling Jacks
Remove Sediment In Fuel Tank
Replace Fan Belt
Replace Air Filter Element
*
Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter.
**
Replace the air cleaner element yearly, or after six cleanings, whichever occurs first.
WINCH USE, OPERATION & MAINTENANCE - MANUAL
Prior to Use
•
Inspect rope or cable and replace if damaged.
•
Check mounting hardware for proper tightness and re-torque if necessary.
•
Gears, ratchet pivot point and shaft bushings must be kept lubricated with a thin film of oil or grease.
10454 O
a warranty request.
Daily
Hours
MLT4060-80M/K Operating Manual
50
100
200
400
Hours
Hours
Hours
*
*
Maintenance
500
1
Hours
Year
**
29
Advertisement
Table of Contents
Troubleshooting
