Danfoss VLT 6000 HVAC Series Quick Setup Manual page 20

Line 4 says that the frequency converter is in Auto mode
with remote reference, and that the motor is running.
Display mode II:
This display mode makes it possible to have three
operating data values displayed at the same time in
line 1. The operating data values are determined
in parameters 007-010 Display readout.
100% 7.8A 5.9kW
50.0Hz
AUTO REMOTE RUNNING
Display mode III:
This display mode is acti v e as long as the [DISPLAY
MODE] key is kept depressed. In the first line,
operating data names and units of operating data
are displayed. In the second line, operating data 2
remains unchanged. When the key is released, the
different operating data values are shown.
REF% CURR.A.POW.,KW
50.0Hz
AUTO REMOTE RUNNING
Display mode IV:
This display mode is only acti v e in connection with
local reference, see also Reference handling. In this
display mode, the reference is determined via the
[+/-] keys and control is carried out by means of the
keys underneath the indicator lamps. The first line
indicates the required reference. The third line gi v es
the relati v e value of the present output frequency at
any gi v en time in relation to the maximum frequency.
The display is in the form of a bar graph.
USE +/-
40.0Hz
0
HAND LOCAL RUNNING
20
SETUP
1
SETUP
1
40Hz
SETUP
1
----60
®
VLT 6000 HVAC
MG.60.C7.02 - VLT is a registered Danfoss trademark