Introduction; General Description - Microplex logiJET TC8 Operator's Manual

_________________________________________________________________________________________

1. Introduction

1.1. General Description

_________________________________________________________________________________________
Microplex
The logiJET TC8 is a 2-color thermal printer perfectly suited for
industrial applications. This printer is equipped with two robust print
modules which can be loaded with ribbons of different colors.
Therefore the printer can be used, for example, for the individual
printing of hazard warning labels in production, chemical,
pharmaceutical, food industry and so on.
This printer is PCL-5 compatible and can thus be operated like a
laser printer. In this way it is not necessary to put up with adaptations
and power drains at SAP-applications or in the progress of changing
from a laser printer to this thermal printer.
The logiJET TC8 printer can be used for printing on roll-fed media
as well as for printing on fanfold media. The maximum processable
printable. The printer is equipped with sensors for Black Mark and
Gap (reflex and transparent).
The wide-opening printheads allow easy access to the media and
the ribbons. Therefore the loading of consumables is quick and
easy.
The print speed is up to up to 6 Inch per second (150 mm per second).
The resolution is 300 dots per inch corresponding to about 12 dots
per millimeter.
The logiJET TC8 is provided with a controller that is also used in
SOLID laserprinters. So the advantages of the thermal print
The Microplex printer controller has its integrated website, this
allows a printer configuration via Ethernet. See
Features of MICROPLEX Printers
Data can be sent without programming expenditure from almost
any software platform, because printer drivers are already
available for this.
Introduction
Networking
for more information.
logiJET TC8
7
Edition 1.2