Table of Contents
Advertisement
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex
6.
Unlock both transparent sensor guides and raise them until
they touch the printhead assemblies.
Fig. 5.1.2.b Unlock both transparent sensor guides
(in order to raise them)
7.
Take the media out of the printer by pulling the continuous
media towards the stack behind the printer.
8.
Remove the box containing the print media from behind
the printer, if need be.
9.
Now you can load the new media to the printer.
dust pollution etc. be sure to perform the
following work steps:
Handling of Consumables
Release lever of the
front transpararent
sensor guide
logiJET TC8
39
Release lever of the
rear transpararent
sensor guide
s interior from
Edition 1.2
Advertisement
Table of Contents
Need help?
Do you have a question about the logiJET TC8 and is the answer not in the manual?