Advertisement
Instructional Booklet
Page 10
Effective: March 2014
4.2 Mounting Location
Choose a location that offers a flat, rigid mounting surface capa-
ble of supporting the weight of the enclosed ATS equipment (see
Figure 8, 100 A and 200 A Standard, Figure 9, 100 A SE, Figure
10, 200 A SE). Protect the transfer switch at all times against
excessive moisture, dust, dirt, lint, and corrosive vapors.
Figure 8. Dimensions and Plan View of a Standard RLC1 ATS (in.) (100 A and 200 A).
For more information visit: www.eaton.com
O & M Manual for the RLC1
Automatic Transfer Switch
IB01602016E
Advertisement
