Procedures For Turning The Power Off - Canon CanoScan 2700F Getting Started

Procedures for Turning the Power Off

Follow the sequence below to turn off the Film Scanner and other devices.
Once you have closed all your application programs and completed your ordi-
nary shutting down procedures, turn off the power switch of your computer.
Turn off the power switch of all the other SCSI devices connected to your com-
puter except for the Film Scanner.
If the power switch of your computer display is independent of the computer power switch, turn off the
display power switch at this time too.
Turn off the power switch of the Film Scanner.
The power switch of the Film Scanner is located on the lower right front panel.
Push the switch in the direction of ( O ) symbol to turn off the power.
• The power indicator will go off.
2
1
CAUTION:
• Always wait for more than 2 seconds after turning off the Film Scanner power switch before turning it
on again.
2
3
45