Table of Contents
Advertisement
The Scanning Quality is Poor
Cause 1:
The film is dirty.
Solution:
Rescan the film after cleaning it.
Cause 2:
The resolution (output device) is incorrectly set.
Solution:
Rescan the film after selecting an appropriate resolution.
The Color Quality is Poor
Cause 1:
The film has faded.
Solution:
In some cases, retouching the image with image processing software can alleviate the problem to
some extent.
Cause 2:
The (negative) film is difficult to color correct with the "Auto" film type function.
Solution:
Rescan the film using the "Manual" setting to specify the film type and scan speed.
software Users Guide )
Cause 3:
The film type is incorrectly specified with the "Manual" setting (negative film).
Solution:
Rescan the film with the film type set to the correct setting for the film brand.
Users Guide )
A Slide Is Jamming Inside the Scanner
Cause :
The slide was inserted crookedly.
Solution:
Open the film guide, remove the slide and make sure it is straight when reinserted.
Scanning Is Taking a Long Time
Cause:
The resolution is set too high.
Solution:
Rescan with the minimum possible resolution setting for the application.
Users Guide )
50
( -> p. 52 )
( -> See the software Users Guide )
( -> See the
( -> See the software
( -> p. 39 )
( -> See the software
Hide quick links:
Advertisement
Table of Contents
