Table of Contents
Advertisement
3.3 Turning the Power On and Off
I =0N
0 = 0FF
When turning the power on, follow the procedure below.
• If the image scanner is connected only to the computer:
(1) First turn on the image scanner.
(2) Then turn on the computer.
• If other equipment (printer, etc.) is connected:
(1) First turn on the image scanner.
(2) Next turn on other equipment, (printer, etc.)
(3) Then turn on the computer.
When turning the power off, follow the procedure below.
• If the image scanner is connected only to the computer:
(1) First turn off the image scanner.
(2) Then turn off the computer.
• If other equipment (printer, etc.) is connected:
(1) First turn off the image scanner.
(2) Next turn off the other equipment, (printer, etc.)
(3) Then turn off the computer.
Note: Always wait at least two seconds after turning off the power before turning it back
on.
3-3
Advertisement
Table of Contents
