50/51P – Phase Overcurrent Protection
4.3.2.1
Phase overcurrent protection settings are located on the device under this sections: Main
Menu> Protection Settings> Current Protection Settings> Phase Overcurrent Protection
In the case of phase overcurrent protection, the protection is activated when the current value
exceeds the set current value. If the current threshold is exceeded in any of the three phases,
the protection will be activated.
Phase overcurrent protections are indicated by I>, I>> and I>>> in IEC 60617; PHI_PIOC_1,
PHI_PIOC_2, PHI_PIOC_3 in IEC 61850; 50/51P-I-1, 50/51P-I-2, 50/51P-I-3 in
IEEE/ANSI Standards.
EŞİK-1 PHI_PIOC_1
EŞİK-2 PHI_PIOC_2
EŞİK-3 PHI_PIOC_3
The menu view is as follows.
Phase Overcurrent Protection
IEC 61850
Phase Overcurrent Protection Function Symbols
Phase Overcurrent Protection Display
IEC 60617
IEEE-ANSI
I>
50/51P-I-1
I>>
50/51P-I-2
I>>>
50/51P-I-3
54