DEMA 400 Series User Manual page 114

The voltage transformer connected to the device is the screen where the primary residual
voltage is assigned. This setting is in the range of (0.1 - 1000) kV.
• Residual VT Secondary
The voltage transformer connected to the device is the display where the secondary residual
voltage is assigned. This setting is made in the (2 - 130) V range.
• Phase CT Primer
The current transformer connected to the device is the screen where the primary phase current
is assigned. This setting is in range (1 to 9999) A.
• Phase CT Secondary
The current transformer connected to the device is the screen where the secondary phase
current is assigned. This setting can be selected as 1A or 5A.
• Neutral CT Primer
The current transformer connected to the device is the display where the primary neutral
current is assigned. This setting
(1 - 999) A.
• Neutral CT Secondary
The current transformer connected to the device is the display where the secondary neutral
current is assigned. This setting can be selected as 1A or 5A.
LED Settings ------------------------------------- Hata! Yer işareti tanımlanmamış.
4.6.6
It is the screen where all signals from the device can be assigned to programmable LEDs on
the main screen. There are 10 virtual LEDs on the device. LED Settings are located on the
device under "Main Menu> Configuration Settings> LED Settings. The setting of the setting
in the menu is as follows.
4.6.7 LED Texts ------------------------------------------------------------------------------------
10 virtual LEDs on the device can be named according to user needs.
4.6.8 Logic Inputs
Under Construction
114