Patient Simulators, creating more realistic Basic Life Support (BLS) and Advanced Cardiac Life Support (ACLS) defibrillation training. Connect ShockLink to training pads and a compatible defibrillator to begin training. The shock energy from a defibrillator is defused in the ShockLink cable.
Page 3
Pad Connector Select ECG Correct Pad Placement Steady Bluetooth Low Battery Enabled Flashing CPR Artefact 2 min Note For more information regarding compatibility with defibrillators other than a Philips defibrillator, Note visit www.laerdal.com/ShockLink. Laerdal LINK Technology detects correct pad placement automatically.
Page 4
Setup Correct Pad Placement Bluetooth Enabled Low Battery Notes To reset the ShockLink device, remove the battery and reinsert after 5 seconds. • Note Remove training pads immediately after use to prevent adhesive residue on the manikin • ShockLink is automatically turned on when the defibrillator is turned on.
Page 5
(Laerdal Learning Application for PC) (SimPad PLUS) ** ShockLink Enabled Manikin WiFi Bluetooth Infra Red * SkillReporter communicates with ShockLink via the manikin after correct pad placement has been detected. ** Visit www.laerdal.com/ShockLink for compatible Manikins and Simulators. ** ShockLink Enabled Simulator...