Memory; Turning The Speaker On/Off - ETEKCITY EBP-UA5 User Manual

Memory

Results are automatically saved after each
measurement. The monitor can save up to 90
results for each user.
To view saved results:
1. Select a user.
2. While the monitor is off, press
to display the average of the last 3
results. Press
result, beginning with the most recent
measurement taken.
3. Press
To delete all saved results:
1. Select a user.
2. While the monitor is off, press and hold
for more than 3 seconds. While still
holding
3. Once "ALL EE" appears on the display, all
results for the user are being deleted.
10
again to view each
again to view the next result.
, press .

Turning the Speaker On/Off

While the monitor is off, press and hold
1.
until the display reads "SP OFF".
2. Press to change the reading to "SP ON"
to turn the speaker on.
3. Press again to change the reading to
"SP OFF" to turn the speaker off.
4. Press to confirm the setting.
Figure 1.1
[Figure 1.1]
[Figure 1.2]
Figure 1.2