ETEKCITY EBP-UA5 User Manual page 13

Using the Blood Pressure Monitor (cont.)
5. Place your arms on a surface so the cuff is at
the same level as your heart. Your arms should
be in a relaxed, natural position.
6. Press to begin measuring. Relax and avoid
moving or talking while measuring. When the
measuring is finished, the results will display.
7. Wait 3 minutes before taking a second
measurement, if necessary.
Figure 4.1
Note:
0.8–1.2 in / 2–3 cm
• Press at any time to stop measuring.
• If the cuff causes any increased discomfort,
immediately press
• Wait at least 3 minutes before measuring
again.
• Only use the air plug to connect or disconnect
the arm cuff. Do not pull on the air hose to
disconnect from the air plug.
• If the monitor cannot read your blood pressure
on your left arm, measure on your right arm.
to turn off the monitor.
13