Memory
Results are automatically saved after each
measurement. The monitor can save up to 90 results
for each user.
To view saved results:
1.
Select a user.
2.
While the monitor is off, press
the average of the last 3 results. Press
again to view each result, beginning with the most
recent measurement taken.
3.
Press
again to view the next result.
To delete all saved results:
1.
Select a user.
2.
While the monitor is off, press and hold
for more than 3 seconds. While still holding
, press
3.
Once "All/EE" appears on the display, all results
for the user have been deleted.
to display
.
Turning the Speaker On/Off
To view saved results:
1.
While the monitor is off, press and hold
until the display reads "SP OFF" or "SP ON".
"SP OFF" means the speaker is turned off, and
"SP ON" means the speaker is turned on.
[Figure 1.1]
2.
Press
to switch speaker settings
between "SP ON" and "SP OFF".
3.
Press
to confirm the setting.
Figure 1.1
[Figure 1.1]
15