Changing Units; Before Measurment - ETEKCITY EBP-UA5 User Manual

Changing Units

While the monitor is off, press and hold
1.
until the display reads "SP OFF" or "SP ON".
2. Once it blinks 2 times, press
change it to "PA OFF" for mmHg.
3. Press to switch to "PA ON" for kPa.
[Figure 2.1]
4. Press to confirm your desired unit.
Figure 2.1
Before Measurement
• Sit on a chair with your feet flat on the floor and
your arms on the table so the cuff is level with
your heart.
again to
• Make sure the air plug is inserted into the air
port.
[Figure 3.1]
Figure 3.1
11