180
Users Guide
General Safety Considerations
This instrument and related documentation must be reviewed for
familiarization with safety markings and instructions before you operate the
instrument.
Symbols
Table 1-1 describes the symbols used in association with this instrument.
Symbol
X
W
~
CAT I
Warnings and Cautions
A Warning identifies hazardous conditions and actions that could cause
bodily harm or death.
A Caution identifies conditions and actions that could damage the Analyzer,
the equipment under test, or cause permanent loss of data.
1-4
800.561.8187
Table 1-1. Symbols
Hazardous voltage
Important information; refer to manual.
Do not dispose of this product as unsorted municipal waste. Go
to Fluke's website for recycling information.
IEC Measurement Category I – CAT I equipment designed to
protect against transients in equipment on circuits not directly
connected to MAINS. Under no circumstances should the
terminals of the Analyzer be connected to any MAINS voltage.
www.
Description
information@itm.co
.com