Safety Information - Fluke Biomedical ESA620 Installation And Getting Started Manual

Safety Information

In this manual, a Warning identifies conditions and
procedures that are dangerous to the user. A Caution
identifies conditions and procedures that can cause
damage to the Product or the equipment under test.
 Warning
To prevent possible electrical shock or
personal injury:
• Use this Analyzer only in the manner
specified by the manufacturer or the
protection provided may be impaired.
• Read the Users Manual before operating
the Analyzer.
• Do not connect the Analyzer to a patient
or equipment connected to a patient. The
Analyzer is intended for equipment
evaluation only and should never be
used in diagnostics, treatment or in any
other capacity where the Analyzer would
come in contact with a patient.
Do not use the product in wet locations,
•
around explosive gases or dust.
Electrical Safety Analyzer
• Inspect the Analyzer before using it. Do
not use the Analyzer if abnormal
conditions of any sort are noted (such as
a faulty display, broken case, etc.)
• Inspect the test leads for damaged
insulation or exposed metal. Check test
lead continuity. Replace damaged leads
before using the Analyzer.
When testing, always be sure to keep
•
your fingers behind the safety barriers
on the test leads.
• Never open the Analyzer's case.
Dangerous voltages are present. There
are no user replaceable parts in the
Analyzer.
• Have the Analyzer serviced only by
qualified personnel.
• Do not use the 15-20 A adapter to power
devices rated in excess of 15 A. Doing so
may overload the installation.
Safety Information
3