Table of Contents
Advertisement
Test Mode: With grill OFF, press and hold the settings button to enter the
Adjustable Parameters menu. Enter Test Mode from either of the two screens
AUG or OFS by pressing the power button. Each additional press of the power
button will advance you through the 8 Test Mode screens. The last screen is the
bYE screen. While on the bYE screen, press the Settings button to return to the
Questions? Call or check out our FAQ!
adjustable parameters screen then press and hold the
Settings button and your grill's controller will return to
the OFF state.
Adjustable Parameter 1: Min Feed Rate - Min
Feed Rate is the minimum rate that the auger is
allowed to feed fuel to the fire pot, regardless of
Set Point. Decreasing the value will allow the grill to
achieve lower temperatures but will increase the risk of
flameouts. Increasing the value will prevent losing fire
but will limit your ability to maintain low temperatures
on hot, sunny days.
Adjustable parameter 1 controller will display AUG.
Additionally, the current auger minimum feed rate will
be displayed as a number. Turning the temperature
knob clockwise will increase and turning counter-
clockwise decrease the value within the range of 30 -
250. (Factory preset: 65)
Adjustable Parameter 2: Temperature Offset - Your
grill has been precisely calibrated at our facility, but
the Temperature Offset allows you to customize how
your controller will operate. Should you choose to
rely on a secondary temperature probe, you can use
the following process to recalibrate your Smart Grill
Technology Controller. Adjustable parameter 2 will
display OFS. Additionally, the current temperature
22
Back to Table of Contents
Settings Button: Press
and hold the setting button
to access the adjustable
parameters menu. Short
presses of the settings
button will scroll through
the adjustable parameters.
Pressing and holding the
settings button will exit the
adjustable parameters menu.
offset percentage value
will be displayed. Turning
the temperature knob
clockwise will increase and
turning counter-clockwise
decrease the value within
the range of -25.0 to 25.0.
(Factory preset: 0)
©2019, Rec Tec Industries, LLC
Hide quick links:
Advertisement
Table of Contents
